Husqvarna TE300i TPI ECU Flash 2018-2023
This flash product works with all TPI bikes under the KTM family and comes included with an idle screw mod.
KTM EXC 300 TPI 2018+ (must be TPI 2 stroke)
Husqvarana 300i TPI 2018+
GasGas EC/EX 300 TPI 2021+
100% software-based flash; we do not physically alter the ECU in any way.
Much better engine characteristics from idle to 1/2 throttle.
Smoother power delivery.
More torque at low/mid RPM.
More HP at high RPM.
Less pipe bang on deceleration.
Safer air-fuel ratios (not lean).
Additional oil injection (more oil = happier pistons/jugs/bottom end)
We alter both maps on the bike which can be selected via the bar mount (or plug if you did not install the bar mount). The configuration remains the same (one is less aggressive, one is more aggressive)
The stock ECU will still connect to your dealer diagnostics. In fact, we do not believe the dealer will even be able to see any changes have been made.
We suggest you set the power valve flush with the casing.
In testing, this has produced the best power and smoothness combination.
You can then play around with this, typically if the bikes a little too powerful I would suggest turning it back inwards 1/4 turn at a time until you are happy with the power delivery.